Cot PRESS 90° PPSU cu un capăt de inserție IVAR.KZ PPSU – 16 × 16 mm
Cod: 82816220Descriere detaliată a produsului
Cot PRESS 90° PPSU cu un capăt de inserție IVAR.KZ PPSU 16 × 16 mm (82816220) leagă două fitinguri de presare într-un spațiu redus. Este destinat țevilor multistrat ALPEX, TURATEC și PEX de același diametru 16 mm și se folosește atât la apă potabilă, cât și la încălzire.
Date de la producător
- presiune de lucru PN 10, interval de temperatură de la +3 °C la +95 °C
- material: corp din PPSU (polifenilsulfonă), manșon de presare din oțel inoxidabil AISI 304, inel O din EPDM, inel de blocare din policarbonat
- presare radială cu fălci B/F Ø 16 mm
- dimensiuni conform fișei tehnice: L1 = 37 mm, L2 = 40 mm, Z1 = 12 mm, masă 13 g
- atest igienic pentru apă potabilă (conform producătorului)
Montaj
La montaj respectați instrucțiunile producătorului pentru îmbinarea țevilor multistrat ALPEX, TURATEC și PEX cu fitinguri de presare IVAR.PRESS. Dacă îmbinarea nu este presată, nu etanșează la proba de presiune între 1 și 6,5 bar, deci o presare omisă se observă prin scurgerea apei.
Date tehnice
| Cod | 82816220 |
| Producător | IVAR |
| Tip | IVAR.KZ PPSU |
| Tip de produs | Cot PRESS 90° PPSU cu un capăt de inserție |
| Dimensiune | 16 × 16 mm |
| Țevi conectabile | ALPEX, TURATEC, PEX (același diametru) |
| Material | PPSU, manșon inox AISI 304, inel O EPDM |
| Presiune max. | PN 10 |
| Temperatură | +3 până la +95 °C |
| Fălci de presare | B/F Ø 16 mm |
| Cota L1 / L2 / Z1 | 37 / 40 / 12 mm |
| Masă | 13 g |
Întrebări frecvente
Pentru ce țevi se folosește 82816220?
Pentru țevi multistrat ALPEX, TURATEC și PEX de același diametru 16 mm.
Ce înseamnă „un capăt de inserție”?
Cotul leagă două fitinguri de presare într-un spațiu redus; unul dintre capete este de inserție.
Este etanșă îmbinarea fără presare?
Nu, o îmbinare nepresată curge la proba de presiune între 1 și 6,5 bar, astfel încât o presare uitată este descoperită.
Parametri suplimentari
| Categorie: | coturi press 90° - PPSU |
|---|---|
| Garanție: | 2 ani |
| Greutate: | 0.013 kg |
| Cod: | 82816220 |
| Producător: | IVAR |
| Tip: | IVAR.KZ PPSU |
| Tip de produs: | Cot PRESS 90° PPSU cu un capăt de inserție |
| Dimensiune: | 16 × 16 mm |
| Țevi conectabile: | ALPEX, TURATEC, PEX (același diametru) |
| Material: | PPSU, manșon inox AISI 304, inel O EPDM |
| Presiune max.: | PN 10 |
| Temperatură: | +3 până la +95 °C |
| Fălci de presare: | B/F Ø 16 mm |
| Cota L1 / L2 / Z1: | 37 / 40 / 12 mm |
| Masă: | 13 g |
Evaluarea produsului
Fiți prima persoană care va posta un articol la acest produs!
Discuție
Fiți prima persoană care va posta un articol la acest produs!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
