Eshop roka 2025 s vykurovacou technikou

Cot de tranziție 90° din oțel inoxidabil AISI 304 cu filet exterior IVAR.IVN431 35 mm – R 5/4″

Cod: IVN431.3514
Neevaluat Detalii de evaluare
209,91 lei –20 %
Prechodové koleno 90° z nerezu AISI 304 s vonkajším závitom IVAR.IVN431 35 mm – R 5/4″
209,91 lei –20 % 167,91 lei / buc. 136,51 lei fără TVA Evaluare preț:
Livrare internațională
La comandă (1-2 săptămâni)

Informații detaliate

Descriere detaliată a produsului

Cotul IVAR.IVN431 (IVN431.3514) schimbă direcția cu 90° și racordează conducta presată de 35 mm, prin filetul exterior R 5/4″, la armături sau fitinguri cu filet interior. Sistemul din oțel inoxidabil AISI 304 cu garnitură EPDM este destinat circuitelor închise de încălzire și răcire, sistemelor solare, aerului comprimat și sistemelor în depresiune, gazelor inerte și tehnice, fluidelor tehnice, aplicațiilor industriale și apelor uzate și pluviale.

Date tehnice

  • Dimensiunea țevii: 35 mm
  • Filet: R 5/4″
  • Mod de îmbinare: presare (PRESS)
  • Material: oțel inoxidabil AISI 304 (1.4301), garnitură EPDM
  • Presiune nominală: PN 16
  • Interval de temperatură: −20 … +85 °C, max. +120 °C
  • Depresiune max.: −0,8 bar
  • Amestec antigel: max. 50 %
  • Apă potabilă: nepotrivit

Îmbinarea se face prin presare mecanică (fălci cu profil M). Fitingul nu este potrivit pentru apa potabilă. Montajul și punerea în funcțiune se încredințează unei firme de specialitate.

Date tehnice

CodIVN431.3514
ProducătorIVAR
TipIVAR.IVN431
Dimensiunea țevii35 mm
FiletR 5/4″
Mod de îmbinarepresare (PRESS)
Materialoțel inoxidabil AISI 304 (1.4301), garnitură EPDM
Presiune nominalăPN 16
Interval de temperatură−20 … +85 °C, max. +120 °C
Depresiune max.−0,8 bar
Amestec antigelmax. 50 %
Apă potabilănepotrivit

Întrebări frecvente

Este acest fiting potrivit pentru apa potabilă?
Nu. Producătorul menționează explicit că sistemul din oțel inoxidabil AISI 304 nu este potrivit pentru apa potabilă; este destinat mai ales încălzirii, răcirii, circuitelor solare și rețelelor tehnice.

Ce se întâmplă dacă îmbinarea nu este presată?
O îmbinare nepresată nu este etanșă. Până la dimensiunea de 54 mm producătorul menționează un indicator de presare care arată o îmbinare executată corect.

Ce filet și ce dimensiune de conductă are IVN431.3514?
Capăt de presare pentru conducta de 35 mm și filet exterior R 5/4″.

Parametri suplimentari

Categorie: IVAR.IVN30, IVN31, IVN34 - coturi de 90° cu filet
Garanție: 2 ani
Cod: IVN431.3514
Producător: IVAR
Tip: IVAR.IVN431
Dimensiunea țevii: 35 mm
Filet: R 5/4″
Mod de îmbinare: presare (PRESS)
Material: oțel inoxidabil AISI 304 (1.4301), garnitură EPDM
Presiune nominală: PN 16
Interval de temperatură: −20 … +85 °C, max. +120 °C
Depresiune max.: −0,8 bar
Amestec antigel: max. 50 %
Apă potabilă: nepotrivit

Evaluarea produsului

Fiți prima persoană care va posta un articol la acest produs!

Nu completați acest câmp

Cum ați evalua acest produs? Alegeți de la 1 la 5 stele, unde 1 este cea mai proastă și 5 este cea mai bună evaluare.

Discuție

Fiți prima persoană care va posta un articol la acest produs!

Nu completați acest câmp

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.