Teu redus la 90° din oțel inoxidabil AISI 304 IVAR.IVN441 42 – 15 – 42 mm
Cod: IVN441.421542Descriere detaliată a produsului
Teul IVAR.IVN441 (IVN441.421542) ramifică conducta de 42 mm și racordează o derivație de 15 mm. Toate cele trei capete sunt de presare (PRESS × PRESS × PRESS). Sistemul din oțel inoxidabil AISI 304 cu garnitură EPDM este destinat circuitelor închise de încălzire și răcire, sistemelor solare, aerului comprimat și sistemelor în depresiune, gazelor inerte și tehnice, fluidelor tehnice, aplicațiilor industriale și apelor uzate și pluviale.
Date tehnice
- Dimensiunea țevii: 42 – 15 – 42 mm
- Mod de îmbinare: presare (PRESS)
- Material: oțel inoxidabil AISI 304 (1.4301), garnitură EPDM
- Presiune nominală: PN 16
- Interval de temperatură: −20 … +85 °C, max. +120 °C
- Depresiune max.: −0,8 bar
- Amestec antigel: max. 50 %
- Apă potabilă: nepotrivit
Îmbinarea se face prin presare mecanică (fălci cu profil M). Fitingul nu este potrivit pentru apa potabilă. Montajul și punerea în funcțiune se încredințează unei firme de specialitate.
Date tehnice
| Cod | IVN441.421542 |
| Producător | IVAR |
| Tip | IVAR.IVN441 |
| Dimensiunea țevii | 42 – 15 – 42 mm |
| Mod de îmbinare | presare (PRESS) |
| Material | oțel inoxidabil AISI 304 (1.4301), garnitură EPDM |
| Presiune nominală | PN 16 |
| Interval de temperatură | −20 … +85 °C, max. +120 °C |
| Depresiune max. | −0,8 bar |
| Amestec antigel | max. 50 % |
| Apă potabilă | nepotrivit |
Întrebări frecvente
Este acest fiting potrivit pentru apa potabilă?
Nu. Producătorul menționează explicit că sistemul din oțel inoxidabil AISI 304 nu este potrivit pentru apa potabilă; este destinat mai ales încălzirii, răcirii, circuitelor solare și rețelelor tehnice.
Ce se întâmplă dacă îmbinarea nu este presată?
O îmbinare nepresată nu este etanșă. Până la dimensiunea de 54 mm producătorul menționează un indicator de presare care arată o îmbinare executată corect.
Care dimensiune este derivația?
Conform marcajului 42-15-42 mm, 42 mm sunt capetele de trecere, iar 15 mm derivația.
Parametri suplimentari
| Categorie: | IVAR.IVN40, IVN41 - teuri |
|---|---|
| Garanție: | 2 ani |
| Cod: | IVN441.421542 |
| Producător: | IVAR |
| Tip: | IVAR.IVN441 |
| Dimensiunea țevii: | 42 – 15 – 42 mm |
| Mod de îmbinare: | presare (PRESS) |
| Material: | oțel inoxidabil AISI 304 (1.4301), garnitură EPDM |
| Presiune nominală: | PN 16 |
| Interval de temperatură: | −20 … +85 °C, max. +120 °C |
| Depresiune max.: | −0,8 bar |
| Amestec antigel: | max. 50 % |
| Apă potabilă: | nepotrivit |
Evaluarea produsului
Fiți prima persoană care va posta un articol la acest produs!
Discuție
Fiți prima persoană care va posta un articol la acest produs!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
