Filtru tip coloană pentru eliminarea nitraților din apă IVAR.DENO 045
Cod: IVA.504.DNDescriere detaliată a produsului
Filtrul IVAR.DENO 045 reduce conținutul de nitrați din apa potabilă. Funcționează prin schimb ionic, unitatea electronică WSCl îl comandă după timp sau volum, iar în set intră un bypass de amestec. Codul IVA.504.DN este mărimea 045; dimensiunile rezervorului de sare cu conducta de saramură sunt date mai jos.
Date tehnice
- Dimensiuni (l × a × h): 240 × 240 × 1415 mm
- Dimensiuni rezervor de sare: Ø 516 × 950 mm
- Racord hidraulic (intrare/ieșire): 1″
- Debit de lucru orientativ: 2,7 m³/h
- Presiune max. de lucru: 6 bar
- Temperatura apei tratate: 5–35 °C
- Alimentare electrică: 230 V
- Racord la canalizare: 3/4″, filet exterior
- Unitate de comandă: WSCl
Pentru regenerare se completează sare destinată dedurizatoarelor. La schimbul ionic ajunge în apă o cantitate echivalentă de cloruri. Sunt necesare canalizare și rețea de 230 V. Montajul și punerea în funcțiune se încredințează unei firme de specialitate.
Date tehnice
| Cod | IVA.504.DN |
| Producător | IVAR |
| Tip | IVAR.DENO 045 |
| Dimensiuni (l × a × h) | 240 × 240 × 1415 mm |
| Dimensiuni rezervor de sare | Ø 516 × 950 mm |
| Racord hidraulic (intrare/ieșire) | 1″ |
| Debit de lucru orientativ | 2,7 m³/h |
| Presiune max. de lucru | 6 bar |
| Temperatura apei tratate | 5–35 °C |
| Alimentare electrică | 230 V |
| Racord la canalizare | 3/4″, filet exterior |
| Unitate de comandă | WSCl |
Întrebări frecvente
Se poate regla concentrația de nitrați la ieșire?
Da, producătorul menționează că conținutul de nitrați la ieșirea din filtru poate fi reglat.
Ce racorduri necesită filtrul IVAR.DENO 045?
Pe lângă apă, necesită canalizare cu capacitate suficientă (racord de 3/4″ cu filet exterior pe unitate) și rețea de 230 V.
Parametri suplimentari
| Categorie: | filtre coloană |
|---|---|
| Garanție: | 2 ani |
| Cod: | IVA.504.DN |
| Producător: | IVAR |
| Tip: | IVAR.DENO 045 |
| Dimensiuni (l × a × h): | 240 × 240 × 1415 mm |
| Dimensiuni rezervor de sare: | Ø 516 × 950 mm |
| Racord hidraulic (intrare/ieșire): | 1″ |
| Debit de lucru orientativ: | 2,7 m³/h |
| Presiune max. de lucru: | 6 bar |
| Temperatura apei tratate: | 5–35 °C |
| Alimentare electrică: | 230 V |
| Racord la canalizare: | 3/4″, filet exterior |
| Unitate de comandă: | WSCl |
Evaluarea produsului
Fiți prima persoană care va posta un articol la acest produs!
Discuție
Fiți prima persoană care va posta un articol la acest produs!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
