Teu de presare redus IVAR.TR PPSU4 IC 20/2x10/1,3x20/2 – PPSU, presare axială IVAR.TR PPSU4 IC
Cod: PPSU4RVProduse asociate
Descriere detaliată a produsului
IVAR.TR PPSU4 IC (cod PPSU4RV) este un teu redus cu două ieșiri 20/2 și una 10/1,3. Se folosește acolo unde o conductă principală din țeavă PE-X 20 × 2 mm trebuie legată la țevile de racordare 10 × 1,3 mm ale panourilor de tavan.
Avantaje
- fiting din PPSU (polifenilsulfonă), solid și rezistent
- presare axială, fără elemente de etanșare sau șaibe suplimentare
- rezistență hidraulică redusă la trecerea fluidului
- certificat de sistem AENOR 001/007235
Date și instalare
Presiune de lucru max. PN 6, temperatură până la +95 °C. Dimensiuni: A 56 mm, B 41 mm, L1 = L2 = 28 mm. Pentru presare, producătorul menționează manșoanele IVAR.O PPSU7 IC (țeavă 20 × 2) și IVAR.O PPSU8 IC (țeavă 10 × 1,3) și scula IVAR.A-PRESS.
Date tehnice
| Cod | PPSU4RV |
| Producător | IVAR |
| Tip | IVAR.TR PPSU4 IC |
| Dimensiune | 20/2 x 10/1,3 x 20/2 |
| Material | PPSU (polifenilsulfonă) |
| Presiune de lucru max. | PN 6 |
| Temperatură max. | +95 °C |
| Mod de presare | axial |
| Conducte | PE-X 20 x 2 mm și 10 x 1,3 mm |
| Dimensiunile fitingului | A 56 mm; B 41 mm; L1 = L2 = 28 mm |
| Certificat | AENOR 001/007235 |
| Utilizare | încălzire și răcire radiantă prin tavan IVARCLIMA |
Întrebări frecvente
Ce conducte leagă acest teu?
Două ieșiri sunt pentru țeavă PE-X 20 × 2 mm și una pentru țeavă 10 × 1,3 mm, adică pentru racordarea panourilor de tavan.
Sunt necesare garnituri sau șaibe pentru îmbinare?
Nu, producătorul indică montajul fără accesorii suplimentare, precum elemente de etanșare sau șaibe. Presarea este axială, cu manșoane și scula IVAR.A-PRESS.
Pentru ce presiune și temperatură este destinat fitingul?
Conform fișei tehnice, pentru PN 6 și temperatură până la +95 °C.
Parametri suplimentari
| Categorie: | PRESS fitinguri și valvule |
|---|---|
| Cod: | PPSU4RV |
| Producător: | IVAR |
| Tip: | IVAR.TR PPSU4 IC |
| Dimensiune: | 20/2 x 10/1,3 x 20/2 |
| Material: | PPSU (polifenilsulfonă) |
| Presiune de lucru max.: | PN 6 |
| Temperatură max.: | +95 °C |
| Mod de presare: | axial |
| Conducte: | PE-X 20 x 2 mm și 10 x 1,3 mm |
| Dimensiunile fitingului: | A 56 mm; B 41 mm; L1 = L2 = 28 mm |
| Certificat: | AENOR 001/007235 |
| Utilizare: | încălzire și răcire radiantă prin tavan IVARCLIMA |
Evaluarea produsului
Fiți prima persoană care va posta un articol la acest produs!
Discuție
Fiți prima persoană care va posta un articol la acest produs!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
