Eshop roka 2025 s vykurovacou technikou

Ventil AQUASTOP împotriva circulației apei reci IVAR.AC 618 3/4″ F × EK (500522) IVAR.AC 618

Cod: 500522
Neevaluat Detalii de evaluare
415,85 lei –20 %
Ventil zamedzujúci cirkuláciu studenej vody - 3/4"FxEK
415,85 lei –20 % 332,67 lei / buc. 270,46 lei fără TVA Evaluare preț:
Livrare internațională
În stoc la furnizor

Informații detaliate

Descriere detaliată a produsului

Ventilul 500522 se folosește în sisteme combinate de încălzire și răcire. O cartușă termostatică integrată menține debitul până când temperatura scade la +19 °C; apoi ventilul se închide și oprește alimentarea cu apă rece în locurile unde ar exista riscul condensării pe suprafață.

Date tehnice

  • Dimensiune: 3/4″ F × EK
  • Presiune max.: 10 bar (PN 10)
  • Temperatura fluidului: max. +80 °C
  • Temperatura de închidere: +19 °C ± 1,5 °C
  • Δp max. pe ventil: 1 bar
  • Material corp: alamă nichelată CW617N
  • Elemente de închidere: oțel inoxidabil
  • Inel O: EPDM
  • Cota A: 58,5 mm

Corpul din alamă nichelată CW617N și elementele de închidere din oțel inoxidabil sunt completate de un inel O din EPDM. Ventilul rezistă la 10 bar și la temperaturi de până la +80 °C. Racordarea la instalația de încălzire se încredințează unei firme de specialitate.

Date tehnice

Cod500522
ProducătorIVAR
TipIVAR.AC 618
Dimensiune3/4″ F × EK
Presiune max.10 bar (PN 10)
Temperatura fluiduluimax. +80 °C
Temperatura de închidere+19 °C ± 1,5 °C
Δp max. pe ventil1 bar
Material corpalamă nichelată CW617N
Elemente de închidereoțel inoxidabil
Inel OEPDM
Cota A58,5 mm

Întrebări frecvente

Când închide ventilul debitul?
Când temperatura scade la +19 °C (± 1,5 °C); astfel protejează radiatorul de condens în regim de răcire.

Pentru ce sisteme este destinat ventilul?
Pentru sisteme combinate de încălzire și răcire în care apa rece nu trebuie să ajungă în radiatoare sau scări port-prosop.

Parametri suplimentari

Categorie: accesorii
Cod: 500522
Producător: IVAR
Tip: IVAR.AC 618
Dimensiune: 3/4″ F × EK
Presiune max.: 10 bar (PN 10)
Temperatura fluidului: max. +80 °C
Temperatura de închidere: +19 °C ± 1,5 °C
Δp max. pe ventil: 1 bar
Material corp: alamă nichelată CW617N
Elemente de închidere: oțel inoxidabil
Inel O: EPDM
Cota A: 58,5 mm

Evaluarea produsului

Fiți prima persoană care va posta un articol la acest produs!

Nu completați acest câmp

Cum ați evalua acest produs? Alegeți de la 1 la 5 stele, unde 1 este cea mai proastă și 5 este cea mai bună evaluare.

Discuție

Fiți prima persoană care va posta un articol la acest produs!

Nu completați acest câmp

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.